Heat Pump Installation

Posted on 05/05/09, filed under Installation Info | No Comments

Pool-Part-Mart engineers installing a new Heatperfector heat pump

To show how easy it is to install your own heat pump here how we do it

Firstly you will need to alter the pool pipe work to plumb in the new heat pump .The one we are installing is a Heatperfector 32kw so the pipe work is 2” to the unit

read the rest of “Heat Pump Installation”

How to Change the Filter Sand.

Posted on 17/04/08, filed under Installation Info | No Comments

How to Change the Filter Sand step by step.

Having received the correct amount of filter media, the following procedure should be followed:-

1. Ensure the pool water is in good condition and at the right level. Make sure the skimmer and pump baskets are free from debris. Backwash the filter for 3 minutes then rinse for 20 seconds – Repeat procedure to

read the rest of “How to Change the Filter Sand.”

Step by Step How to Fit a Liner 2.

Posted on 17/04/08, filed under Installation Info | No Comments

The following steps are continuing from my first
blog…. how to fit a liner.

9. Now you need to unroll the liner and find the deep end marker. Remove the label and throw it away if you fail to do this a stain may appear under the liner months after installation.
10. If

read the rest of “Step by Step How to Fit a Liner 2.”